|
Northern
Lights Model M844W3 Marine Diesel Generator |
|
|
|
|
A vessel that
needs 16 to 20 kW is large enough that
continuous power is critical to its
operation. Unfortunately, most sets in this
range have small displacement, light duty
diesels that can’t stand up to heavy use.
Some even need turbochargers to compensate
for their small displacement.
The M844W3 is different. Powered by a naturally aspirated, four
cylinder diesel, this set has the low end
torque needed to start big electric motors.
Yet it weighs under 900 pounds and is
compact in size. The M844W3 meets US EPA
Tier III emission standards protecting the
environment you enjoy.
Vibration isolation mounts, cast air intake manifold and sound maze
intake silencer make the set remarkably
smooth and quiet. A sound enclosure is
available. |
 |
Operation and
maintenance are simple. A 20 foot wire
harness and control panel lets you run the
set from your boat’s bridge. The engine’s DC
electrical system uses reliable relays
instead of delicate printed circuit boards.
If a failure should occur, you can simply
plug in an inexpensive relay. All service
points are on one side within easy reach.
The sea water pump’s location makes impeller
changes a snap.
Need hydraulic power? Add an optional front PTO (power take off)
with an electric clutch. At the touch of a
button you have power for your bow thruster
and winches without starting your main
engine.
|
|
|
|
Cylinders: |
4 Inline |
 |
|
Bore: |
3.30 in (84 mm) |
|
Stroke: |
3.50 in (90 mm) |
|
Displacement: |
121 cid (1.9 ltr) |
|
Fuel System: |
Mechanical |
|
Aspiration: |
Natural |
|
Length: |
43.4 in (1103 mm) |
|
Width: |
19.9 in (505 mm) |
|
Height: |
26.6 in (676 mm) |
|
Weight: |
874 lbs (396.4 kg) |
 |
| |
NOTE:
Information, specifications,
materials and dimensions subject
to change without notice.
|
|
|
|
|
Please be sure to visit our
Used & Surplus
page for great
prices on Northern Lights Marine Generators |
Back to Northern Lights Marine Generators |
|
|
